A quick small-scale compatibly test is recommended to make sure the colorant stays evenly dispersed and the epoxy cures properly. As with most projects, artwork especially so, each piece is unique. Do not use water based paints or pigments like latex as they can cause foaming. Lastly, translucent dyes such as Transtint and Piñata Colors are also compatible with epoxy.
#Mas epoxy table top chemical resistance pro#
We’ve also had great success with Gamblin Dry Pigments and Black Diamond powder mica pigments, both metallic and flat, to get a marbled or colored effect with the Table Top Pro epoxy. Opaque pigments such as One-Shot Lettering Enamels, K-Bond Color Pigments and most oil based alkyd paints work well. A wide range of colorants, pigments, dyes and tints are compatible with MAS Table Top Pro. 2-5% loading level should have no significant effect on cure. Typically, you would add a small amount of the colorant into the resin or into the blended resin and hardener. To tint epoxy, simply use an epoxy compatible colorant and follow the manufacturer’s instructions. What is the mix ratio of MAS Tabletop Pro? You can dilute down the mixed Table Top resin/hardener with 2-5% denatured alcohol to stretch the material a bit further on seal coats. That being said, MAS Table Top is the absolute clearest epoxy system we offer, and specifically formulated for flood coating applications. You could seal coat your project with the MAS 2:1 Non-blushing system or MAS PES, but we recommend sealing with MAS Table Top so you don’t have to invest in multiple systems to complete one project. The purpose of a seal coat is to minimize the effects of off gassing by creating a thin air-tight barrier between a porous wooden surface and the Table Top epoxy flood coat so air bubbles won’t percolate up through the curing epoxy creating cosmetic defects. Lastly, wipe clean with a cotton t-shirt rag and denatured alcohol.
Allow the seal coat to cure to a rock hard solid, and sand with 80-120 grit paper, paying special attention to imperfections such as air bubbles.
Take care to cover and seal any voids or cracks present. Next, apply a thin coat of mixed epoxy to surface.
#Mas epoxy table top chemical resistance free#
To start, the surface must be clean, dry and free of contamination. Always apply a seal coat before flood coating.
0 kommentar(er)
